BRITMAC
In-cavity Floor Trunking - Type CF
|
BRITMAC In-cavity Floor Trunking - Type CF |
|
|
IN-CAVITY FLOOR TRUNKING - TYPE CF This trunking is produced in a variety of configurations and in conjunction with raised floor boxes provides a structured distribution solution for power, voice and data wiring. Manufactured
from galvanised steel sheet, the trunking is available
in a variety of lengths allowing a modular approach to design and installation.
When
specified
|
|
|
| Product List | |||
| TRUNKING | |||
| List No. | LENGTH (mm) | ||
|
CF1T40-600 |
One compartment | 600 |  |
| CF1T40-850 | One compartment | 850 | |
| CF1T40-1200 | One compartment | 1200 | |
| CF1T40-1800 | One compartment | 1800 | |
| CF2T40-600 | Two compartment | 600 | |
| CF2T40-800 | Two compartment | 800 | |
| CF2T40-1200 | Two compartment | 1200 | |
| CF2T40-1800 | Two compartment | 1800 | |
| CF3T40-600 | Three compartment | 600 | |
| CF3T40-750 | Three compartment | 750 | |
| CF3T40-1200 | Three compartment | 1200 | |
| CF3T40-1800 | Three compartment | 1800 | |
|
|||
| JUNCTION UNITS | ||
| List No. | ||
| CF1JT40 | One Compartment Tee | |
|
|
|
Copyright© by Raga Engineering
Ltd. |
with
the
Grosvenor or Briton
range of
floor boxes
pre-assembled with flexible conduits,
installation
time is reduced to a minimum.
A
full range of junction units , bends, tap-off units, risers, end caps,
etc, complete the installation. Custom designed and manufactured items
are available to suit special site conditions.
